Original title: Double 11 Upgrade: i7 12700K+RTX3080 Customized installation with the theme of "Yan Zhishen Ghost Killing Blade"
Under the upsurge of cross-border co branding between brands and IP, there are quite a few hardware products with IP co branding, such as Golder, EVA, League of Heroes, Cyberpunk 2077, etc. However, there are tens of millions of popular IPs, and manufacturers can't finish all of them. So for some IPs or characters that they like but do not have corresponding products, it is a good way to directly customize the theme themselves. For example, the theme customization this time is the butterfly tolerance in the Ghost Killing Blade, supplemented with lovely You Douzi. Let's take a look at it together.
First, put some pictures of the final effect.
Then comes the configuration list:
CPU: Core i7-12700K
Memory: XPG Longyao DDR5 LANCER RGB memory
Main board: MSI MAG Z690 EDGE TI WIFI blade
Graphics card: MSI RTX 3080 SUPRIM X 10G Chaolong
Solid state: XPG S70 Blade
Chassis: first horse god black full transparent version
Power supply: Xianma Black Diamond 850W
Radiator: Sima Mirror series KW360D
First of all, in terms of motherboard, MSI MAG Z690 EDGE TI WIFI blade is selected here, which is more than enough to carry the Core i7-12700K. In terms of appearance, MSI MAG Z690 EDGE TI WIFI blade is the consistent black PCB+large-area silver radiator design of this series, which is very handsome.
Integrated I/O heat dissipation vest, with MSI dragon totem and brand logo on it. The side power supply part is also covered by a large size of heat sink, which has sufficient heat dissipation effect whether in daily use or overclocking.
The PCH chip of the motherboard and the M.2 of four PCIe 4.0x4 are covered with heat sink, of which the second M.2 is integrated with the motherboard chip, while the third and fourth share the same heat sink vest.
Next, in terms of memory and solid state, the Longyao DDR5 LANCER RGB memory of XPG and the solid state of XPG S70 Blade are both black in appearance, which is very compatible with the color matching of the whole machine.
From the appearance, the XPG set of Longyao DDR5 LANCER RGB memory adopts an irregular design, with one side decorated with twills and the top with an irregular triangular light guide strip.
Different from the general memory heat dissipation vest, the XPG Longyao DDR5 LANCER RGB memory uses a 1.95mm thick heat sink design, which can further reduce the working temperature of memory particles and has better stability. In terms of light effects, XPG Longyao DDR5 LANCER RGB memory has 12 kinds of light effects to choose from, and supports the synchronous light effects of ASUS, Gigabyte, MSI and Huaqing.
For the new generation platform, the XPG Longyao DDR5 LANCER RGB memory also supports the latest XMP 3.0 technology, which allows the memory to overclock with one key, eliminating the trouble of manually adjusting parameters. After inserting the memory into the motherboard, you can see that the vest height of the memory is moderate. Even if you use air cooling, you don't have to worry about compatibility.
Next is the chassis. This time, we selected the black full transparent chassis of Xianma Yanzhishen. The front and side of the chassis are fully transparent tempered glass, and the design around it is simple and flat, so there is a lot of room for transformation.
From the side view, the full transparent side plate of the non porous sliding glass can be quickly disassembled. In terms of compatibility, in addition to supporting the E-ATX motherboard and 415mm long graphics card, the Sima Yanzhishen black full transparent version can also support the installation of 164mm air cooling, 360 water cooling and 2 * SSD/1 * HDD+2 * HDD+1 * SDD hard disks, with sufficient expansion performance and space.
At the side panel on the other side, the full black transparent version of Xianma Yanshen provides a large area of cooling holes, which can be used for cold exhaust air or air cooling inlet air.
Butterflies bear on the front, and beans on the back. The two chefs are ecstatic.
You Douzi, a popular character, may be familiar to friends who have not seen Ghost Blade. The logo of the ghost killing blade at the lower left corner of the side panel serves as the finishing touch.
After looking at the chassis, the next step is to install the motherboard into the chassis.
In terms of the installation of heat dissipation, I chose the 360 cold exhaust ceiling installation method, and then used three 12cm fans for air intake in the front.
In terms of graphics cards, this time we chose MSI RTX 3080 SUPRIM X 10G Super Dragon. Cool metal grey color matching, with three blade generation 6 cooling fans.
In addition to the handsome appearance, MSI's RTX 3080 SUPRIM X 10G super dragon has cool RGB lights on the front and side.
The 320W power consumption of a single card is also equipped with three 8pin interfaces for auxiliary purposes.
After the whole machine platform is installed, the next step is to install the customized light board of the power supply compartment.
Due to the quick disassembly structure of the front panel of Xianma Yanzhishen, it is very convenient to install the machine.
After the panel is installed, the whole machine is officially installed.
After power on, the light board in the chassis lights up, which is very beautiful with the cool RGB light effect.
After the side panel is covered, the characters inside and outside the box form a good echo.
Three top mounted fans supporting RGB light effect can coordinate with the motherboard to achieve synchronous light effect.
After power on, the irregular light guide strip of XPG Longyao DDR5 LANCE RGB memory is very recognizable.
Although the RTX3080 graphics card has three 8pin connectors, it can be very neat with the wire management comb.
The belief lamp on the side of the video card, with its own RGB light effect, is very handsome.
The metal LOGO carved on the back plate of the graphics card is full of texture.
The details of the brushed texture+highlight chamfered video card backplane are good.
After the machine is officially lit, a simple performance and temperature test is next.
First, take a look at the information list of CPU-Z.
Then comes the memory performance test of AIDA64. Under the frequency of DDR5-6000MHz, the read-write speed of this platform is 90013MB/s and 82688MB/s, and the latency is only 74.8ns. The performance is much better than that of DDR4.
Then came Master Lu, who scored 2332228 in comprehensive performance.
3DMark scored 11521 in the light tracking Port Royal test.
Finally, the Furmark copying machine test of the graphics card was conducted. After 10 minutes of operation, the full load temperature of the graphics card was only 78 degrees, and the heat dissipation effect was good.
In general, the installation effect of the ghost killing blade theme customized by Yan Zhishen is quite good. First of all, it has purple+black color matching and the image of Butterfly Tolerance+You Douzi, which looks very impressive. In terms of performance, although the performance of the 13th generation and 40 series graphics cards has taken off, the price is also high, and the Core i7-12700K and RTX3080 graphics cards also have strong performance. At present, the price is relatively solid, which is a good time to start. In addition, the price of DDR5 memory is now back to the public level, and high frequency and large capacity are added to productivity innovation. Go back to Sohu to see more
Editor in charge:
